
Acc Module

Jiri Kuthan

   iptel.org

Ramona-Elena Modroiu

   voice-system.ro

Edited by

Bogdan-Andrei Iancu

   Copyright  2002, 2003 FhG FOKUS

   Copyright  2004, 2005 voice-system.ro
     _________________________________________________________

   Table of Contents
   1. User's Guide

        1.1. Overview

              1.1.1. General Example

        1.2. Extra accounting

              1.2.1. Overview
              1.2.2. Definitions and syntax
              1.2.3. How it works

        1.3. Multi Call-Legs accounting

              1.3.1. Overview
              1.3.2. Configuration
              1.3.3. Logged data

        1.4. Dependencies

              1.4.1. OpenSER Modules
              1.4.2. External Libraries or Applications

        1.5. Exported Parameters

              1.5.1. early_media (integer)
              1.5.2. failed_transaction_flag (integer)
              1.5.3. report_ack (integer)
              1.5.4. report_cancels (integer)
              1.5.5. multi_leg_enabled (integer)
              1.5.6. src_leg_avp_id (integer)
              1.5.7. dst_leg_avp_id (integer)
              1.5.8. log_flag (integer)
              1.5.9. log_missed_flag (integer)
              1.5.10. log_level (integer)
              1.5.11. log_fmt (string)
              1.5.12. log_extra (string)
              1.5.13. radius_config (string)
              1.5.14. radius_flag (integer)
              1.5.15. radius_missed_flag (integer)
              1.5.16. service_type (integer)
              1.5.17. radius_extra (string)
              1.5.18. diameter_flag (integer)
              1.5.19. diameter_missed_flag (integer)
              1.5.20. diameter_client_host (string)
              1.5.21. diameter_client_port (int)
              1.5.22. diamter_extra (string)
              1.5.23. db_flag (integer)
              1.5.24. db_missed_flag (integer)
              1.5.25. db_table_acc (string)
              1.5.26. db_table_missed_calls (string)
              1.5.27. db_url (string)
              1.5.28. db_localtime (int)
              1.5.29. acc_sip_from_column (string)
              1.5.30. acc_sip_to_column (string)
              1.5.31. acc_sip_status_column (string)
              1.5.32. acc_sip_method_column (string)
              1.5.33. acc_i_uri_column (string)
              1.5.34. acc_o_uri_column (string)
              1.5.35. acc_sip_callid_column (string)
              1.5.36. acc_user_column (string)
              1.5.37. acc_time_column (string)
              1.5.38. acc_from_uri_column (string)
              1.5.39. acc_to_uri_column (string)
              1.5.40. acc_totag_column (string)
              1.5.41. acc_fromtag_column (string)
              1.5.42. acc_domain_column (string)
              1.5.43. acc_src_leg_column (string)
              1.5.44. acc_dst_leg_column (string)
              1.5.45. db_extra (string)
              1.5.46. detect_direction (integer)

        1.6. Exported Functions

              1.6.1. acc_log_request(comment)
              1.6.2. acc_db_request(comment, table)
              1.6.3. acc_rad_request(comment)
              1.6.4. acc_diam_request(comment)

   2. Developer's Guide
   3. Frequently Asked Questions

   List of Examples
   1-1. early_media example
   1-2. failed_transaction_flag example
   1-3. report_ack example
   1-4. report_cancels example
   1-5. multi_leg_enabled example
   1-6. src_leg_avp_id example
   1-7. dst_leg_avp_id example
   1-8. log_flag example
   1-9. log_missed_flag example
   1-10. log_level example
   1-11. log_fmt example
   1-12. log_extra example
   1-13. radius_config example
   1-14. radius_flag example
   1-15. radius_missed_flag example
   1-16. service_type example
   1-17. radius_extra example
   1-18. diameter_flag example
   1-19. diameter_missed_flag example
   1-20. diameter_client_host example
   1-21. diameter_client_host example
   1-22. diameter_extra example
   1-23. db_flag example
   1-24. db_missed_flag example
   1-25. db_table_acc example
   1-26. db_table_missed_calls example
   1-27. db_url example
   1-28. db_localtime example
   1-29. acc_sip_from_column example
   1-30. acc_sip_to_column example
   1-31. acc_sip_status_column example
   1-32. acc_sip_method_column example
   1-33. acc_i_uri_column example
   1-34. acc_o_uri_column example
   1-35. acc_sip_callid_column example
   1-36. acc_user_column example
   1-37. acc_time_column example
   1-38. acc_from_uri_column example
   1-39. acc_to_uri_column example
   1-40. acc_totag_column example
   1-41. acc_fromtag_column example
   1-42. acc_domain_column example
   1-43. acc_src_leg_column example
   1-44. acc_dst_leg_column example
   1-45. db_extra example
   1-46. detect_direction example
   1-47. acc_log_request usage
   1-48. acc_db_request usage
   1-49. acc_rad_request usage
   1-50. acc_diam_request usage
     _________________________________________________________

Chapter 1. User's Guide

1.1. Overview

   acc module is used to report on transactions to syslog, SQL,
   RADIUS and DIAMETER (beta version).

   To report on a transaction using syslog, use "setflag" to mark
   a transaction you are interested in with a flag, load
   accounting module and set its "log_flag" to the same flag
   number. The acc module will then report on completed
   transaction to syslog. A typical usage of the module takes no
   acc-specific script command -- the functionality binds
   invisibly through transaction processing. Script writers just
   need to mark the transaction for accounting with proper
   setflag.

   What is printed depends on module's "log_fmt" parameter. It's
   a string with characters specifying which parts of request
   should be printed:

     * n = Cseq number
     * c = Call-Id
     * m = Method
     * i = Inbound Request-URI
     * o = Outbound Request-URI
     * p = Username part of inbound Request-URI
     * D = Domain part of inbound Request-URI
     * f = From header
     * r = From TAG
     * F = From URI
     * 0 = From URI user part
     * X = From URI domain part
     * t = To header
     * d = To TAG
     * T = To URI
     * 1 = To URI user part
     * S = 3-digit Status code from reply
     * s = Status
     * U = User name (digest, From URI otherwise)
     * u = digest Username

   If a value is not present in request, "n/a" is accounted
   instead.

   Note that:

     * A single INVITE may produce multiple accounting reports --
       that's due to SIP forking feature
     * Subsequent ACKs and other requests do not hit the server
       and can't be accounted unless record-routing is enforced.
       The ACKs assert very little useful information anyway and
       reporting on INVITE's 200 makes most accounting scenarios
       happy.
     * There is no session accounting -- OpenSER maintains no
       sessions. If one needs to correlate INVITEs with BYEs for
       example for purpose of billing, then it is better done in
       the entity which collects accounting information.
       Otherwise, SIP server would have to become
       sessions-stateful, which would very badly impact its
       scalability.
     * If a UA fails in middle of conversation, a proxy will
       never learn it. In general, a better practice is to
       account from an end-device (such as PSTN gateway), which
       best knows about call status (including media status and
       PSTN status in case of the gateway).

   Support for SQL, RADIUS and DIAMETER works analogously. The
   SQL support is compiled in the moduls. For RADIUS and DIAMETER
   you need to enable it by recompiling the module with properly
   set defines: uncomment the RAD_ACC or DDIAM_ACC lines in
   modules/acc/Makefile. To compile RADIUS support, you need to
   have radiusclient-ng (only versions higher or equal to 0.5.0)
   installed on your system which is available from
   http://developer.berlios.de/projects/radiusclient-ng/. The
   radius client needs to be configured properly. To do so, use
   the template at etc/radiusclient.conf and make sure that
   module's radius_config parameter points to its location. In
   particular, accounting secret must match that one configured
   in server and proper dictionary is used (one is available at
   etc/sip_dictionary). Uses along with FreeRadius (
   http://www.freeradius.org/) and Radiator (
   http://www.open.com.au/radiator/) servers have been reported
   to us.

   For Radius support, the radius libraries must be dynamically
   linkable. You need to configure your OS so that OpenSER, when
   started, will find it. Typically, you do so by manipulating
   LD_LIBRARY_PATH environment variable or configuring ld.so.
     _________________________________________________________

1.1.1. General Example

loadmodule "modules/acc/acc.so"
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)

if (uri=~"sip:+40") /* calls to Romania */ {
    if (!proxy_authorize("sip_domain.net" /* realm */,
    "subscriber" /* table name */))  {
        proxy_challenge("sip_domain.net" /* realm */, "0" /* no qop */
);
        break;
    }

    if (method=="INVITE" & !check_from()) {
        log("from!=digest\n");
        sl_send_reply("403","Forbidden");
        break;
    }

    setflag(1); /* set for accounting (the same value as in log_flag!)
    t_relay();  /* enter stateful mode now */
};
     _________________________________________________________

1.2. Extra accounting

1.2.1. Overview

   Along the static information defined via FMT-s, ACC modules
   allows dynamical selection of extra information to be logged.
   There are two classes of information that are accessible by
   extra accounting: data from SIP messages (as headers) and
   internal OpenSER data (as AVPs).
     _________________________________________________________

1.2.2. Definitions and syntax

   Selection of extra information is done via xxx_extra
   parameters by specifying the names of additional information
   you want to log. This information is defined via
   pseudo-variables and may include headers or AVPs values or
   other message or system values. The syntax of the parameter
   is: 

     * xxx_extra = extra_definition (';'extra_definition)* 
     * extra_definition = log_name '=' pseudo_variable 

   The full list of supported pseudo-variables in OpenSER is
   availabe at:
   http://openser.org/docs/pseudo-variables-1.1.x.html

   Via log_name you define how/where the data will be logged. Its
   meaning depends of the accounting support which is used:

     * LOG accounting - log_name will be just printed along with
       the data in log_name=data format;
     * DB accounting - log_name will be the name of the DB column
       where the data will be stored.IMPORTANT: add in db acc
       table the columns corresponding to each extra data; 
     * RADIUS accounting - log_name will be the AVP name used for
       packing the data into RADIUS message. The log_name will be
       translated to AVP number via the dictionary. IMPORTANT:
       add in RADIUS dictionary the log_name attribute. 
     * DIAMETER accounting - log_name will be the AVP code used
       for packing the data into DIAMETER message. The AVP code
       is given directly as integer, since DIAMETER has no
       dictionary support yet. IMPORTANT: log_name must be a
       number.
     _________________________________________________________

1.2.3. How it works

   Some pseudo variables may return more than one value (like
   headers or AVPs). In this case, the returned values are
   embedded in a single string in a comma-separated format.
     _________________________________________________________

1.3. Multi Call-Legs accounting

1.3.1. Overview

   A SIP call can have multiple legs due forwarding actions. For
   example user A calls user B which forwards the call to user C.
   There is only one SIP call but with 2 legs ( A to B and B to
   C). Accounting the legs of a call is required for proper
   billing of the calls (if C is a PSTN number and the call is
   billed, user B must pay for the call -as last party modifing
   the call destination-, and not A -as initiator of the call.
   Call forwarding on server is only one example which shows the
   necessity of the having an accounting engine with multiple
   legs support.
     _________________________________________________________

1.3.2. Configuration

   First how it works? The idea is to store in several OpenSER
   AVP pairs the originator and destination for each call-leg.
   For the A call B and B forwards to C example, the AVP pairs
   are (A,B) and (B,C). There are two type of AVPs -source and
   destination- which refined a call-leg. The administator must
   take care and to properly insert these AVP from the script (in
   proper order and with correct type).

   When the accouning infomation for the call will be
   written/sent, all the call-leg pairs will be added (based on
   found AVP pairs).

   By default, the multiple call-legs support is disable - it can
   be enabled via the multi_leg_enabled module parameter. By
   enabling it, you will have also to define the AVPs to be used
   for source and destination (which define one call-leg). From
   performance reasons, the AVPs may be specified only via IDs.
     _________________________________________________________

1.3.3. Logged data

   For each call, all the source-destination pairs (which defined
   a call-leg) will be looged. How the information will be
   actually logged, depends of the data backend:

     * syslog -- all pairs will be added to one record string as
       src_leg=xxx, dst_leg=xxxx pairs.
     * database -- each pair will be separatly logged (due DB
       data structure constraints); several records will be
       written, the difference between them being only the source
       & destination of the corresponding call-leg. with database
       support.

       Note

   You will need to add in your DB (all acc related tables) the
   two colums for call-leg definition (source and destination).
     * Radius -- all pairs will be added to same Radius
       accounting message as RADIUS AVPs - for each call-leg two
       RADIUS AVPs will be added: source and destination

   Note

   You will need to add in your dictionaty the two RADIUS AVPs
   used for call-leg definition (source and destination):
   Sip-Leg-Source and Sip-Leg-Destination
     * Diameter -- not supported. with database support.
     _________________________________________________________

1.4. Dependencies

1.4.1. OpenSER Modules

   The module depends on the following modules (in the other
   words the listed modules must be loaded before this module):

     * tm -- Transaction Manager
     * a database module -- If database support is used.
     * rr -- Record Route, if "detect_direction" module parameter
       is enabled.
     _________________________________________________________

1.4.2. External Libraries or Applications

   The following libraries or applications must be installed
   before running OpenSER with this module loaded:

     * radiusclient-ng 0.5.0 or higher -- if compiled with RADIUS
       support. See
       http://developer.berlios.de/projects/radiusclient-ng/.
     _________________________________________________________

1.5. Exported Parameters

1.5.1. early_media (integer)

   Should be early media (183) accounted too ?

   Default value is 0 (no).

   Example 1-1. early_media example
modparam("acc", "early_media", 1)
     _________________________________________________________

1.5.2. failed_transaction_flag (integer)

   Per transaction flag which says if the transaction should be
   accounted also in case of failure (status>=300).

   Default value is 0 (no flag).

   Example 1-2. failed_transaction_flag example
modparam("acc", "failed_transaction_flag", 4)
     _________________________________________________________

1.5.3. report_ack (integer)

   Shall acc attempt to account e2e ACKs too ? Note that this is
   really only an attempt, as e2e ACKs may take a different path
   (unless RR enabled) and mismatch original INVITE (e2e ACKs are
   a separate transaction).

   Default value is 1 (yes).

   Example 1-3. report_ack example
modparam("acc", "report_ack", 0)
     _________________________________________________________

1.5.4. report_cancels (integer)

   By default, CANCEL reporting is disabled -- most accounting
   applications are happy to see INVITE's cancellation status.
   Turn on if you explicitly want to account CANCEL transactions.

   Default value is 0 (no).

   Example 1-4. report_cancels example
modparam("acc", "report_cancels", 1)
     _________________________________________________________

1.5.5. multi_leg_enabled (integer)

   If set to a non 0 value, it will enables the logging of the
   call-legs. See Section 1.3 for a detailed description of the
   Multi Call-Legs accounting.

   Default value is 0 (disabled).

   Example 1-5. multi_leg_enabled example
modparam("acc", "multi_leg_enabled", 1)
     _________________________________________________________

1.5.6. src_leg_avp_id (integer)

   Defines the AVP (ID AVP) which contains the source URI part of
   a call-leg. See Section 1.3 for a detailed description of the
   Multi Call-Legs accounting.

   Default value is 0 (undefined).

   Example 1-6. src_leg_avp_id example
modparam("acc", "src_leg_avp_id", 110)
     _________________________________________________________

1.5.7. dst_leg_avp_id (integer)

   Defines the AVP (ID AVP) which contains the destination URI
   part of a call-leg. See Section 1.3 for a detailed description
   of the Multi Call-Legs accounting.

   Default value is 0 (undefined).

   Example 1-7. dst_leg_avp_id example
modparam("acc", "dst_leg_avp_id", 110)
     _________________________________________________________

1.5.8. log_flag (integer)

   Request flag which needs to be set to account a transaction.

   Default value is 1.

   Example 1-8. log_flag example
modparam("acc", "log_flag", 2)
     _________________________________________________________

1.5.9. log_missed_flag (integer)

   Request flag which needs to be set to account missed calls.

   Default value is 2.

   Example 1-9. log_missed_flag example
modparam("acc", "log_missed_flag", 3)
     _________________________________________________________

1.5.10. log_level (integer)

   Log level at which accounting messages are issued to syslog.

   Default value is L_NOTICE.

   Example 1-10. log_level example
modparam("acc", "log_level", 2)   # Set log_level to 2
     _________________________________________________________

1.5.11. log_fmt (string)

   Defines what parts of header fields will be printed to syslog,
   see "overview" for list of accepted values.

   Default value is "miocfs".

   Example 1-11. log_fmt example
modparam("acc", "log_fmt", "mfs")
     _________________________________________________________

1.5.12. log_extra (string)

   Extra values to be logged.

   Default value is NULL.

   Example 1-12. log_extra example
modparam("acc", "log_extra", "ua=$hdr(User-Agent);uuid=$avp(i:123)")
     _________________________________________________________

1.5.13. radius_config (string)

   This parameter is radius specific. Path to radius client
   configuration file, set the referred config file correctly and
   specify there address of server, shared secret (should equal
   that in /usr/local/etc/raddb/clients for freeRadius servers)
   and dictionary, see etc for an example of config file and
   dictionary.

   Default value is
   "/usr/local/etc/radiusclient/radiusclient.conf ".

   Example 1-13. radius_config example
modparam("acc", "radius_config", "/etc/radiusclient/radiusclient.conf")
     _________________________________________________________

1.5.14. radius_flag (integer)

   Request flag which needs to be set to account a transaction --
   RADIUS specific.

   Default value is 1.

   Example 1-14. radius_flag example
modparam("acc", "radius_flag", 2)
     _________________________________________________________

1.5.15. radius_missed_flag (integer)

   Request flag which needs to be set to account missed calls --
   RADIUS specific.

   Default value is 2.

   Example 1-15. radius_missed_flag example
modparam("acc", "radius_missed_flag", 3)
     _________________________________________________________

1.5.16. service_type (integer)

   Radius service type used for accounting.

   Default value is 15 (SIP).

   Example 1-16. service_type example
modparam("acc", "service_type", 16)
     _________________________________________________________

1.5.17. radius_extra (string)

   Extra values to be logged via RADIUS - RADIUS specific.

   Default value is NULL.

   Example 1-17. radius_extra example
modparam("acc", "radius_extra", "via=$hdr(Via[*]); email=$avp(s:email)"
)
     _________________________________________________________

1.5.18. diameter_flag (integer)

   Request flag which needs to be set to account a transaction --
   DIAMETER specific.

   Default value is 1.

   Example 1-18. diameter_flag example
modparam("acc", "diameter_flag", 2)
     _________________________________________________________

1.5.19. diameter_missed_flag (integer)

   Request flag which needs to be set to account missed calls --
   DIAMETER specific.

   Default value is 2.

   Example 1-19. diameter_missed_flag example
modparam("acc", "diameter_missed_flag", 3)
     _________________________________________________________

1.5.20. diameter_client_host (string)

   Hostname of the machine where the DIAMETER Client is running
   -- DIAMETER specific.

   Default value is "localhost".

   Example 1-20. diameter_client_host example
modparam("acc", "diameter_client_host", "3a_server.net")
     _________________________________________________________

1.5.21. diameter_client_port (int)

   Port number where the Diameter Client is listening -- DIAMETER
   specific.

   Default value is 3000.

   Example 1-21. diameter_client_host example
modparam("acc", "diameter_client_port", 3000)
     _________________________________________________________

1.5.22. diamter_extra (string)

   Extra values to be logged via DIAMETER - DIAMETER specific.

   Default value is NULL.

   Example 1-22. diameter_extra example
modparam("acc", "diameter_extra", "7846=$hdr(Content-type);7847=$avp(s:
email)")
     _________________________________________________________

1.5.23. db_flag (integer)

   Request flag which needs to be set to account a transaction --
   database specific.

   Default value is 1.

   Example 1-23. db_flag example
modparam("acc", "db_flag", 2)
     _________________________________________________________

1.5.24. db_missed_flag (integer)

   Request flag which needs to be set to account missed calls --
   database specific.

   Default value is 2.

   Example 1-24. db_missed_flag example
modparam("acc", "db_missed_flag", 3)
     _________________________________________________________

1.5.25. db_table_acc (string)

   Table name of accounting successfull calls -- database
   specific.

   Default value is "acc"

   Example 1-25. db_table_acc example
modparam("acc", "db_table_acc", "myacc_table")
     _________________________________________________________

1.5.26. db_table_missed_calls (string)

   Table name for accounting missed calls -- database specific.

   Default value is "missed_calls"

   Example 1-26. db_table_missed_calls example
modparam("acc", "db_table_missed_calls", "myMC_table")
     _________________________________________________________

1.5.27. db_url (string)

   SQL address -- database specific. If is set to NULL or emty
   string, the SQL support is disabled.

   Default value is "NULL" (SQL disabled).

   Example 1-27. db_url example
modparam("acc", "db_url", "mysql://user:password@localhost/openser")
     _________________________________________________________

1.5.28. db_localtime (int)

   If DB timestamps should follow localtime or GMT time. Any
   non-zero value enables this option.

   Default value is "0".

   Example 1-28. db_localtime example
modparam("acc", "db_localtime", 1)  # use GMT time
     _________________________________________________________

1.5.29. acc_sip_from_column (string)

   Column name in accouting table to store the "sip_from" value.

   Default value is "sip_from".

   Example 1-29. acc_sip_from_column example
modparam("acc", "acc_sip_from_column", "sip_from")
     _________________________________________________________

1.5.30. acc_sip_to_column (string)

   Column name in accouting table to store the "sip_to" value.

   Default value is "sip_to".

   Example 1-30. acc_sip_to_column example
modparam("acc", "acc_sip_to_column", "sip_to")
     _________________________________________________________

1.5.31. acc_sip_status_column (string)

   Column name in accouting table to store the "sip_status"
   value.

   Default value is "sip_status".

   Example 1-31. acc_sip_status_column example
modparam("acc", "acc_sip_status_column", "sip_status")
     _________________________________________________________

1.5.32. acc_sip_method_column (string)

   Column name in accouting table to store the "sip_method"
   value.

   Default value is "sip_method".

   Example 1-32. acc_sip_method_column example
modparam("acc", "acc_sip_method_column", "sip_method")
     _________________________________________________________

1.5.33. acc_i_uri_column (string)

   Column name in accouting table to store the "incoming_URI"
   value.

   Default value is "i_uri".

   Example 1-33. acc_i_uri_column example
modparam("acc", "acc_i_uri_column", "in_uri")
     _________________________________________________________

1.5.34. acc_o_uri_column (string)

   Column name in accouting table to store the "outgoing_uri"
   value.

   Default value is "o_uri".

   Example 1-34. acc_o_uri_column example
modparam("acc", "acc_o_uri_column", "out_uri")
     _________________________________________________________

1.5.35. acc_sip_callid_column (string)

   Column name in accouting table to store the "sip_callid"
   value.

   Default value is "sip_callid".

   Example 1-35. acc_sip_callid_column example
modparam("acc", "acc_sip_callid_column", "sip_callid")
     _________________________________________________________

1.5.36. acc_user_column (string)

   Column name in accouting table to store the "username" value.

   Default value is "username".

   Example 1-36. acc_user_column example
modparam("acc", "acc_user_column", "username")
     _________________________________________________________

1.5.37. acc_time_column (string)

   Column name in accouting table to store the "time" value.

   Default value is "time".

   Example 1-37. acc_time_column example
modparam("acc", "acc_time_column", "time")
     _________________________________________________________

1.5.38. acc_from_uri_column (string)

   Column name in accouting table to store the "from_uri" value.

   Default value is "from_uri".

   Example 1-38. acc_from_uri_column example
modparam("acc", "acc_from_uri_column", "from_uri")
     _________________________________________________________

1.5.39. acc_to_uri_column (string)

   Column name in accouting table to store the "to_uri" value.

   Default value is "to_uri".

   Example 1-39. acc_to_uri_column example
modparam("acc", "acc_to_uri_column", "to_uri")
     _________________________________________________________

1.5.40. acc_totag_column (string)

   Column name in accouting table to store the "to_tag" value.

   Default value is "totag".

   Example 1-40. acc_totag_column example
modparam("acc", "acc_totag_column", "totag")
     _________________________________________________________

1.5.41. acc_fromtag_column (string)

   Column name in accouting table to store the "from_tag" value.

   Default value is "fromtag".

   Example 1-41. acc_fromtag_column example
modparam("acc", "acc_fromtag_column", "fromtag")
     _________________________________________________________

1.5.42. acc_domain_column (string)

   Column name in accouting table to store the "domain" value.

   Default value is "domain".

   Example 1-42. acc_domain_column example
modparam("acc", "acc_domain_column", "domain")
     _________________________________________________________

1.5.43. acc_src_leg_column (string)

   Column name in accouting table to store the "source_leg" value
   in case of multi-leg accouting.

   Default value is "src_leg".

   Example 1-43. acc_src_leg_column example
modparam("acc", "acc_src_leg_column", "src_leg")
     _________________________________________________________

1.5.44. acc_dst_leg_column (string)

   Column name in accouting table to store the "destination_leg"
   value in case of multi-leg accouting.

   Default value is "dst_leg".

   Example 1-44. acc_dst_leg_column example
modparam("acc", "acc_dst_leg_column", "dst_leg")
     _________________________________________________________

1.5.45. db_extra (string)

   Extra values to be logged into database - DB specific.

   Default value is NULL.

   Example 1-45. db_extra example
modparam("acc", "db_extra", "ct=$hdr(Content-type); email=$avp(s:email)
")
     _________________________________________________________

1.5.46. detect_direction (integer)

   Controlles the direction detection for sequential requests. If
   enabled (non zero value), for sequential requests with
   upstream direction (from callee to caller), the FROM and TO
   will be swapped (the direction will be preserved as in the
   original request).

   It affects all values related to TO and FROM headers (body,
   URI, username, domain, TAG).

   Default value is 0 (disabled).

   Example 1-46. detect_direction example
modparam("acc", "detect_direction", 1)
     _________________________________________________________

1.6. Exported Functions

1.6.1. acc_log_request(comment)

   acc_request reports on a request, for example, it can be used
   to report on missed calls to off-line users who are replied
   404 - Not Found. To avoid multiple reports on UDP request
   retransmission, you would need to embed the action in stateful
   processing.

   Meaning of the parameters is as follows:

     * comment - Comment to be appended.

   This function can be used from REQUEST_ROUTE, FAILURE_ROUTE.

   Example 1-47. acc_log_request usage
...
acc_log_request("Some comment");
...
     _________________________________________________________

1.6.2. acc_db_request(comment, table)

   Like acc_log_request, acc_db_request reports on a request. The
   report is sent to database at "db_url", in the table referred
   to in the second action parameter.

   Meaning of the parameters is as follows:

     * comment - Comment to be appended.
     * table - Database table to be used.

   This function can be used from REQUEST_ROUTE, FAILURE_ROUTE.

   Example 1-48. acc_db_request usage
...
acc_log_request("Some comment", "Some table");
...
     _________________________________________________________

1.6.3. acc_rad_request(comment)

   Like acc_log_request, acc_rad_request reports on a request. It
   reports to radius server as configured in "radius_config".

   Meaning of the parameters is as follows:

     * comment - Comment to be appended.

   This function can be used from REQUEST_ROUTE, FAILURE_ROUTE.

   Example 1-49. acc_rad_request usage
...
acc_rad_request("Some comment");
...
     _________________________________________________________

1.6.4. acc_diam_request(comment)

   Like acc_log_request, acc_diam_request reports on a request.
   It reports to the configured Diameter server.

   Meaning of the parameters is as follows:

     * comment - Comment to be appended.

   This function can be used from REQUEST_ROUTE, FAILURE_ROUTE.

   Example 1-50. acc_diam_request usage
...
acc_diam_request("Some comment");
...
     _________________________________________________________

Chapter 2. Developer's Guide

   The module does not provide any API to use in other OpenSER
   modules.
     _________________________________________________________

Chapter 3. Frequently Asked Questions

   3.1. Where can I find more about OpenSER?
   3.2. Where can I post a question about this module?
   3.3. How can I report a bug?

   3.1. Where can I find more about OpenSER?

   Take a look at http://openser.org/.

   3.2. Where can I post a question about this module?

   First at all check if your question was already answered on
   one of our mailing lists:

     * User Mailing List -
       http://openser.org/cgi-bin/mailman/listinfo/users
     * Developer Mailing List -
       http://openser.org/cgi-bin/mailman/listinfo/devel

   E-mails regarding any stable OpenSER release should be sent to
   <users@openser.org> and e-mails regarding development versions
   should be sent to <devel@openser.org>.

   If you want to keep the mail private, send it to
   <team@openser.org>.

   3.3. How can I report a bug?

   Please follow the guidelines provided at:
   http://sourceforge.net/tracker/?group_id=139143.
